24
SkyZhone 1600, 1400, 1200 Hardware Install Guide
Ethernet Data and Power Cable (Early Version)
Current Ethernet Data and Power cables ship with an RJ45 connector. The RJ connector has the
appropriate number of wires to make a Data only cable or a data and power cable. These cables
follow the EIA/TIA 568B standard. However, early versions of the cable shipped with a blunt end,
requiring the user to add the RJ connector. In addition, the early version of the cable used a
different color code for the wires. The table below summarizes the differences.
Note:
Before crimping a new RJ connector on the cable, double check the part number in order to
verify the color codes of the wire used in the cable.
Table 10: Ethernet (plus Aux Pwr) External Cable with Blunt End
P
i
n
Signal
Wire color (Early Version)
Part number: UTS6JC1210PX1035
Part number: UTS6JC1210PX10330
Wire color (Current Version)
Part number: UTS6JC1210PX103A5
Part number: UTS6JC1210PX103A30
Part number: UTS6JC1210PX103A10
Part number: UTS6JC1210PX103B5
Part number: UTS6JC1210PX103B30
Part number: UTS6JC1210PX103B10
A
TX_P
Blue
White/Orange
B
TX_N
White/Blue
Orange
C
RX_P
Orange
White/Green
D
RX_N
White/Orange
Green
E
No Connection
F
F
48V
Green
Blue
White/Blue
G
G
Return_48V
White/Green
White/Brown
Brown
H
No Connection