32
SkyZhone 1600, 1400, 1200 Hardware Install Guide
Figure 9: Bracket attached to the mounting plate attached to the pole
5.
Adjust the shelf until it is level by rotating the unit along the curved slot tracks.
6.
Once the unit is level, securely tighten the center nut and four bolts that hold the shelf to the
pole mount bracket as shown in Figure 10.
7.
Attach the antennas to the unit. Note the antennas are different sizes. The three longer
antennas are connected to the top of the unit. The two shorter antennas are mounted to the
bottom of the unit. The antennas are not interchangeable. It is critical that the longer
antennas are on the top, and the shorter ones on the bottom of the unit.
8.
Slide the unit into the sun shield housing.
9.
Secure with 4 (four) tamper-resistant screws, provided in the mounting kit, through the holes
on the front of the unit.
WARNING!
Insure that the Chassis Ground is properly connected before the
next steps
.
10.
Attach the Ethernet cable.
11.
Attach the AC power cable to the unit (other end connected to AC Mains by a licensed
electrician per local and national codes.
