123 of 184
MAINTENANCE AND USE MANUAL
furnace D
EN
3.5
IDENTIFICATION DATA
The equipment described in this manual has an ID platelet giving information about both the
equipment and the manufacturer:
Zhermack S.p.A.
BADIA POLESINE - ITALY
C305302 - D 30
Matr. 20000000
230 V~ 50/60 Hz 1550W
A
B
C
D
The equipments has been built in compliance with the EC directives listed in the enclosed "EC
declaration of conformity". When requesting spare parts, information or assistance from your
Authorised Servicing Centre always quote the data on the ID plate.
Should the ID plate deteriorate and become illegible, even partially, order a replacement plate
from the manufacturer: remember to quote the relevant data.
A.
Name and address of manufacturer
B.
Equipment code and model
C.
Serial number
D.
Power supply information
Do not remove and/or damage the plate as you must be able to read the data at
all times.
ATTENZIONE! DANGER OF AN ELECTRICAL
CURRENT.
DO NOT OPEN DOORS OR REMOVE PROTECTION BEFORE YOU
HAVE DISCONNECTED THE PLUG FROM THE ELECTRICAL SOURCE.
3.5.1
On-equipment labels and symbols
The following symbols are applied on the equipment:
WARNING! HOT PARTS. EXTREME DANGER.
USE PINCERS, EYE GOGGLES AND HEAT-INSULATED GLOVES.
