132 of 184
MAINTENANCE AND USE MANUAL
furnace D
EN
B
Figure
4
Fig. 4 :
Open the oven door using the handle (
B
).
After placing the grooved plate and the refractory
supports (see diagram) inside the oven, insert the
firing cylinders and close the door properly.
Figure
3
Fig. 3 :
Position the equipment correctly in the
designated area, observing the instructions in
paragraphs 6.3 and 6.3.1.
Connect the lead to the mains power
socket: follow the instructions in
section 6.4 carefully.
Even when the
D
oven is at ambient
temperature it is still advisable to use
protective gloves during handling.
7
4
Figure
5
Fig. 5 :
Press the main switch (
7
) positioned on the
display: the switch will light up.
• the word OFF appears on the display (
4
).
The oven is now ready for data programming.
6.5
STARTING UP THE EQUIPMENT
The aspiration fan flue must be free and must not be connected to other tubes
or hood ducts. Should the above-described connection be necessary it is
essential that no elbows or bends be created as combustion fumes and gases
would no longer be drawn outwards.
Position the equipment so that the fan flue is beneath the mobile hood
aspiration tube.
