Part IV Setting Parameters
BECS-129S Singular-head Computerized Embroidery Machine
51
Sequin Delay Time: (Options: 0~30)
This parameter is to adjust the coordination between the sequin device
rising/descending time and the sequin embroidery ending/starting time, which
are different due to different sequin devices and their mechanical features.
Larger parameter values correspond to longer delay time.
Seq. Auto Lift: (Options: Yes, No)
This parameter is to set whether the sequin device automatic lift.
Rope Embroidery: (Options: 1~ (needle number), No)
This is to set the needle position of rope embroidery. Set this parameter
to enable rope embroidery in the machine with the rope embroidery device.
The setting links to another parameter “Needles in a Head”. If “Needles in a
Head” is set as 12, “Rope Embroidery” can be set as 1~12. If “Needles in a
Head” is set as 9, then the parameter value can be selection among 1~9. “No”
means to close the rope embroidery function.
Rope Speed: (Options: 450, 500, 550, 600, 650, 700
)
This parameter is to limit the rotation speed of the main shaft in rope
embroidery.
Boring Distance:(Options:1~150,for 0.1mm~15mm )
This parameter is to set the distance between the normal needle position and
the boring needle position.
Содержание BECS-129S
Страница 4: ......
