50
Installation and Operating Instructions
V03
Step 2:
Press the control key (see section 7.1.1) approx. once per second until the LCD
display shows:
Then press the control key for 10 seconds. The LCD will show the safety regulation
as illustrated below:
DE VDE-AR-N 4105 stands for the German safety regulation (VDE4105)
Step 3
:
Before the LCD backlight goes out from step 2, press the control key again once a
second to scroll through the different safety regulations showing on the screen will
constantly change.
For example, if you choose the safety regulation for the Netherlands, press the
control key until the LCD display shows ‛NL NEN50438“ as below:
Wait about 10 seconds. When the LCD backlight has turned off, the safety regulation
setting is complete.
Comment:
1 If the display shows ‛DEFAULT“, keep on pressing the control button until the
display shows the desired safety regulation.
2 To set up other safety regulations refer to the example of setting the
Netherlands
NL NEN50438
Pac= 0.0 W
DE VDE-AR-N 4105
Pac= 0.0W
ZL ××××S
Pac= 0.0W
