Zeversolar Eversol-TLC 10K, Инструкция по установке и эксплуатации

Страница: 30 / 70

Installation and operating instructions 29
4 Ensure that the cable is correctly positioned:
Result Measure
If the stranded wires are visible in the
chamber of the clamping bracket, the
cable is correctly positioned. • Proceed to step 5.
If the stranded wires are not visible in the
chamber, the cable is not correctly
positioned. • Release the clamping bracket. To do so,
insert a flat-blade screwdriver (blade width:
3.5 mm) into the clamping bracket and lever it
open.
• Remove the cable and go back to step 2.
5 Push the swivel nut up to the thread and tighten (torque: 2 Nm).