Zeversolar Eversol-TLC 10K, Инструкция по установке и эксплуатации

Страница: 15 / 70

14 Installation and operating instructions
4.3 Mounting the inverter with the wall bracket
CAUTION!
Risk of injury due to the heavy weight of the inverter!
• When mounting, two persons are needed, take into account that the inverter
weighs approx. 48kg.
Mounting procedures:
1 Use the wall bracket as a drilling template
and mark the positions of the drill holes, Drill
5 holes required using a drill with 10mm bit.
The holes must be about 70mm deep. keep
the drill vertical to the wall, and hold the drill
steady to avoid tilted holes.
WARNING!
Risk of the inverter falling off and injuring the installer!
• Before inserting wall anchors, measure the depth and distance of the holes.
• If the measured values don’t fulfill the mounting requirement, redrill the holes.
2 Fix the wall bracket to the wall with 5 wall anchors and bolts delivered with the
inverter.