12 Installation and Operating Instructions V01
3.
Hold the inverter using the handles at the corners, attach the inverter onto the
wall bracket tilted slightly downwards.
4.
Check both sides of the outer fin of the inverter to ensure that it is securely in
place.
5.
Attach the outer fins of heat sink to both sides of the wall bracket using M5
screws. (screw driver type: T25, torque: 2.5Nm).
If a second protective conductor is required locally, ground the inverter and secure
it so that it cannot be lifted off the wall bracket (see section 5.4.3 “Second
protective grounding connection”).
