Installation and Operating Instructions V01
33
6.3 System monitoring via WiFi
User can monitor the inverter through the integrated Ethernet module with WiFi
module (optional). The connection diagram between the inverter and internet with a
WiFi connection is shown as follows.
Installation steps of the antenna:
1.
Take the antenna included in the scope of delivery.
2.
Remove the sealing plug on the WIFI connection port.
3.
Tighten the antenna to the WIFI connection port by hand. Make sure the
antenna is securely connected.
6.4 Communication with a third party monitoring device
This inverter supports communication with the third party monitoring device such as
Metecontrol, Solar-Log etc. For detailed wiring method, please refer to operating
manual of corresponding third party monitoring device.
6.5 Updating the firmware via USB
If need to update the firmware, use a flat-blade screwdriver (blade width: 9 mm) to
unscrew the M20 screw plugs located at the bottom of the housing.
