32
6.4 Communication and Monitoring Device
There are 2 RJ45 ports on the bottom side of the Z10 series inverter as shown in the
following figure:
The 2x RJ45 ports are used for multipoint communications. Up to 50 Z10 series
inverters can be connected via these 2 ports. The upper computer can communicate
with these inverters via a single signal cable at the same time with support for a
maximum cable length of 1000m. Data and inverter configuration parameters are set
through the ports.
7. Display and Operation
7.1 LCD Panel
D
A
B
C
F
E
G