30
(ill. 7)
Open-end spanner A/F 15 mm
(ill. 8)
Torque screwdriver A/F 12 mm
Cable preparation
(ill. 9)
Use 14-10AWG (2.5-6mm
2
) conductor as DC cable.
Dimension
A
3-6mm,
b
2.5-6mm
2
(ill. 10)
Strip the cable end
L
with 6 mm to 7.5 mm of insulation.
(ill. 11)
Open the clamp (K) and hold. Place the contact in the
appropriate cross section range.
Turn the crimp lugs upwards. Release the clamp (K). The
contact is fixed.
(ill. 12)
Press the pliers gently together until the crimp lugs are
properly located within the crimping die.