Zetor MAJOR HS Скачать руководство пользователя страница 66

Страница: 66 / 140

Working with PTO shaft

Before attaching of an implement, driven by means of the tractor PTO shaft, check the speed

compatibility of both, it means tractor PTO shaft and implement driven shaft (540 rpm or 1,000 rpm).

Different PTO speed values may cause serious damages and injuries.

PTO shaft covers

1. When working with PTO shaft, mind proper

attachment of all covers.

2. After completing the work, always mount the PTO

shaft cover back.

NM13N001

3. Connecting and disconnecting cardan shaft

of aggregated machine to rear PTO shaft of the tractor
to be done only with the engine at halt, disengaged

PTO shaft clutch and dependent and independent

revolutions of PTO shaft lever in (N) - neutral position!

4. Connecting and disconnecting cardan shaft of

aggregated machine to front PTO shaft of tractor to be

done always only with engine at standstill and

disengaged PTO shaft!

5. Any repairs or cleaning of parts of aggregated

machines driven by PTO shaft to be done only with
engine at standstill, disengaged PTO shaft clutch and

dependent and independent PTO shaft revolutions

lever in (N) - neutral position.

6. After ending the works with rear PTO shaft it is

necessary to shift dependent and independent PTO

shaft revolutions lever to (N) -neutral position.

MHS16N024

The cover of PTO shaft (1) can be demounted by
unscrewing the cover in the direction of arrows.
The cover of PTO shaft (2) must be pushed in the
direction of and arrow and tilted over in the direction from
tractor for working with rear PTO shaft.

NM13N003

DRIVE OF AGRICULTURAL MACHINERY

Содержание MAJOR HS













































































































































Результаты поиска

Содержание MAJOR HS

Отзывы:

Бренды по названию

Популярные бренды

Zetor MAJOR HS, Руководство оператора

Результаты поиска

Содержание MAJOR HS

Отзывы:

Бренды по названию

Популярные бренды