manualshive.com logo in svg

Zetor MAJOR HS, Руководство оператора

Поделиться
Скачать
Zetor MAJOR HS Скачать руководство пользователя страница 30

 

Passenger´s seat 
Passenger´s seat is tiltable and placed on the left mudguard of the cabin.

 

 

MHS16N056

 

 

Raising of the seat 
Release the co-driver's seat with the lever (1) and tilt it in the direction of the arrow (2). Turn the seat by 90° 
in the direction of the arrow (3), tilt it and secure it. 
 
Lowering of the seat 
Perform lowering of the seat using the opposite procedure. Tilt the seat against the direction of the arrow (4), 
turn it by 90° (3) a lower it (2). Secure the seat with the lever (1). 
 
Driver´s seat 

Tilting and protrusion of steering wheel 

1. The controller of the seat suspension adjustment 
according to the driver

s weight (performed by turning 

the controller). By turning to the left, the adjusted weight is 
decreased; by turning to the right, the adjusted weight is 
increased. 
2. The controller of the seat height adjustment (performed 
by turning the controller). By turning to the left, the seat 
height is increased; by turning to the right, the seat height 
is decreased. 
3. The lever of the longitudinal adjustment of the seat 
(press the lever from the seat, perform longitudinal 
adjustment of the seat and release the lever). 
4. The lever for adjusting the seat (move the lever up, turn 
the seat around its vertical axis and release the lever). 
5. Tiltable armrest 
6. The controller of the backrest tilt adjustment (by turning 
the controller the backrest tilt is adjusted). 
 

MHS16N002

 

 

Release the lever (1) by turning in the direction of the 
arrow, adjust the height and inclination of the steering 
wheel and tighten the lever (1) by turning against the 
direction of the arrow. 
When the button (2) is pressed and the lever is moved 
from the steering wheel, the lever (1) can be adjusted to 
any desired position. 
 

MHS16N003

 

 

ACQUAINTANCE WITH THE TRACTOR

29

Содержание MAJOR HS













































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды