Zetor MAJOR HS Series, Руководство оператора

Страница: 65 / 140

Automatic mouth of the CBM stage hitch
After the attachment of the trailer you must always check whether the indicator (3) is
retracted in accordance with fig. (B).
Aggregation with trailer and semitrailer
Maximum permitted vertical static suspensions load for trailers and semitrailers
Maximum weight of aggregated braked trailer or semitrailer must not exceed the value given
on tractor's production plate and the data given in vehicle identification card. Maximum speed of the
set is given by the maximum permitted speed of the slower vehicle of the set.
When the lever (1) is moved in the direction of the arrow
(a), the pin (2) is retracted to the upper position, which is
signalled by the extended indicator (3), see fig. (A). When
the mouth gets onto the shaft lug, the pin will automatically
slide into the lug of the connected trailer. You can lower
the hitch pin (2) manually by moving the lever (1) in the
arrow (b) direction. The insertion of the pin is signalled by
the retracted indicator (3), see fig. (B).
E304
Aggregation with a semi-trailer must not exceed
the value of the maximum allowed static load of the
rear axle of the tractor.
NM13N097
Hinge type Allowed
vertical
static
load Ø of
hinge
pin
(ball) Hinge type Allowed
vertical
static
load Ø of
hinge
pin
(ball)
1,500 kg 31 mm 2,000 kg 38 mm
TRANSPORTATION
64