ZERONE ZEUS-100/80, Руководство по эксплуатации

Страница: 24 / 38

ZEUS-100/80 ZO-OM-008
REV : 08 22 ZERONE
(Monopolar
Handle)
(Twin Button
Handle)
(Silicone Patient
Plate)
(Patient Return
Plate Cable)
●
Bioplar
① Select the Bipolar mode and set the output(W) using UP and DOWN button.
② Connect Bipolar Cable to Bipolar Forceps connection.
③ Connect Foot Switch to Monopolar Foot Switch connector in the back of equipment.
④ Use it by step on Foot Switch.
●
Power off : Turn the electrosurgical unit OFF and disconnect the power cord from the
Receptacle(wall mains outlet).
●
Make sure that the electrosurgical unit and foot switch are completely dry before
storage.
5.7 Accessory Diagram
●
Diagram of Mnipolar Handle/Twin Button Handle and Patient Return Plate Cable
When using Forceps. don
’
t activate this surgical unit until it makers contact
with a patient.
Note that bipolar TIPs should not short-circuited. each other to prevent
a direct cause of product faults.
Caution