Zero88 Jester Скачать руководство пользователя страница 37 | Manualshive

Страница: 37 / 65

background image

Setup Mode

JesterML Operating Manual

73-406-00 Issue 1.0

37 of 65

To  change  these  options,  use  the  cursor  buttons  to  select  <Record  Options>  and
press ENTER.

The  ‘Mode’  setting  allows  you  to  choose  between  the  Partial  and  Full  recording
modes described above.  Select this field and press ENTER to toggle the recording
mode.  When ‘Partial’ is selected, the following 4 options will be presented:

Brightness: All/Channel

When  set  to  ‘All’,  fixture  intensity  channels  (and  desk  channels  on  the
JesterML24)  are  always  recorded.    When  set  to  ‘Channel’,  fixture  intensity
channels (and desk channels on the JesterML24) must be tagged to be recorded.
The default setting is ‘All’.  Since all brightness channels are mixed HTP and thus
can  be  excluded  by  simply  programming  at  0%,  it  should  not  normally  be
necessary to change this setting.

Colour: All/Channel

When set to ‘All’, if one colour parameter is changed by moving a wheel, then all
colour parameters for the currently selected fixtures are automatically also tagged
by the desk. When set to ‘Channel’, only the adjusted colour parameter is tagged
by the desk. The default setting for colour is ‘All’.

Beamshape: All/Channel

When  set  to  ‘All’,  if  one  beamshape  parameter  is  changed  by  moving  a  wheel,
then  all  beamshape  parameters  for  the  currently  selected  fixtures  are
automatically also tagged by the desk.  When set to ‘Channel’, only the adjusted
beamshape parameter is tagged by the desk.  The default setting for beamshape
is ‘Channel’.

Position: All/Channel

When set to ‘All’, if one position parameter is changed by moving a wheel, then all
position  parameters  for  the  currently  selected  fixtures  are  automatically  also
tagged by the desk.  When set to ‘Channel’, only the adjusted position parameter
is  tagged  by  the  desk.    The  default  setting  for  position  is  ‘All’.    Note  that
movement  effects  are  always  tagged  or  untagged  in  their  entirety,  it  is  not
possible to separately tag or untag individual control parameters of a movement
effect.

To  leave  the  Record  Options  menu,  press  the  down  cursor  button  until  <OK>  is
selected, and press ENTER.  If you have changed the recording Mode, then the desk
will  need  to  process  all  recorded  data  to  ensure  channels  are  programmed.    Any
unprogrammed channels will be programmed by the desk at their default values (0%
for brightness channels, Home value for LTP channels).  A pop-up warning  will ask
you to confirm that this is OK, since the changes to recorded data cannot be undone.

«
...
35
36
37
38
39
...
»

Содержание Jester


































































Отзывы:

Нет отзывов

Похожие инструкции для Jester

MicroSeries 1202

Бренд: Mackie Страницы: 15

Бренд: Samson Страницы: 2

Бренд: Yamaha Страницы: 26

Бренд: Oster Страницы: 14

Бренд: JB Systems Страницы: 18

Бренд: eta Страницы: 40

Бренд: RAM Страницы: 19

Бренд: ALLEN & HEATH Страницы: 36

Бренд: Samson Страницы: 24

Mini-Deja’Vibe MDV-1

Бренд: Fulltone Страницы: 2

Бренд: Yamaha Страницы: 13

Бренд: Yamaha Страницы: 95

Бренд: Yamaha Страницы: 186

Бренд: Yamaha Страницы: 315

Бренд: Ide Line Страницы: 23

Бренд: T-Rex Страницы: 5

REPLAY BOX DELAY

Бренд: T-Rex Страницы: 5

Бренд: T-Rex Страницы: 5

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды