Zero YS-X6, Быстрый старт

Страница: 53 / 60

Copyright(C)2012ZeroUAV All Rights Reserved 53
Auto Go Home and Landing. After the aircraft reaches home location, the craft
can be controlled manually.
Take off fully automatically, please check Part 9 (3) “Auto Take Off" .
Enable receiver/ Disable receiver
It is strongly suggested for new operator that do not disable receiver when
flying.
This function can be used only when your phone has GPS hardware and got
more than 5 satellites locked, and in Auto-hover mode. After enabled Follow Me,
the aircraft will fly automatically following mobile GPS location.
Note: Generally, phone position has error about 5~10 meters.
In Auto Navigation mode, fill in the new waypoint number which
you will fly to.
Attention:
Fill in a number which is in the range of uploaded waypoints number.
In Auto-Hover mode, it's used to set flight altitude, put in altitude needed here.
Example: filling in 10 means setting flight altitude as 10 meters.
Please confirm to align the channel without any electric power connected.
Example: When moving Throttle stick as Minimum-Maximum-Minimum, if GCS
data displays as below: Manual Throttle is 7 when Throttle stick is at the
Minimum position and 90 when at the Maximum position, that means Channel
Align is completed successfully.
Special
Special Special
Special Attention
Attention Attention
Attention