EN
16
Cleaning and Storage
PLEASE NOTE!
■
Make sure that no water enters the device or is spilled over the device.
■
Do not use any caustic or abrasive cleaning agents to clean the device. They may damage the surface.
• Make sure that the device has been disconnected from the mains and has cooled down.
• For cleaning, use a damp cloth to which you can apply a little detergent if necessary.
• Clean the contact surface immediately after every treatment and make sure that no residues of ultrasonic gel
remain on the ultrasound head. Disinfect it from time to time with a cloth soaked in alcohol.
• Keep the device out of the reach of children and animals in a dry, clean place which is protected from direct
sunlight when it is not in use. Do not leave it connected to the power supply.
02392_EN_180x140_GM_V1.indd 16
02392_EN_180x140_GM_V1.indd 16
19.11.2019 15:54:18
19.11.2019 15:54:18