Zero-Plus 02392, Руководство по эксплуатации

Страница: 14 / 24

EN 14
Operation
PLEASE NOTE!
■ Use the device for no more than 15 minutes in one go and no more than 30 minutes daily on one body
part.
■ Keep the ultrasonic gel clean. It must be free of dust, dirt or similar.
Ultrasonic gel is required to use the device to establish a connection between the skin and the device and thus
ensure its e
ff ectiveness. A tube of ultrasonic gel is supplied with the device. Once this has been used up, use
an ultrasonic gel with the CE mark from a pharmacy that is suitable for your needs. If you are unsure about
possible incompatibilities, consult a chemist or physician.
1. Preparing the Treatment Area
Clean the skin in the area to be treated with soap or alcohol. If the skin is too hairy, trim or shave the hair to ensure
optimum treatment.
2. Applying Ultrasonic Gel
Apply a generous amount of ultrasonic gel to the area of the body that is to be treated. The treatment area should
be twice as large as the diameter of the ultrasound head.
IMPORTANT! Never apply the ultrasonic gel directly to
the ultrasound head.
The amount of ultrasonic gel is dependent on the size of the area of the body that is going to be treated.
What is important is that the ultrasound head can glide e
ff ortlessly over the skin.
3. Installation
Connect the barrel connector of the mains adapter to the mains adapter socket of the device. Plug the mains
adapter all the way into the plug socket.
02392_EN_180x140_GM_V1.indd 14 02392_EN_180x140_GM_V1.indd 14 19.11.2019 15:54:18 19.11.2019 15:54:18