Zero Motorcycles MX, Руководство пользователя, Страница: 33 / 100

4-4
General Operation
Pre-Ride Inspection
Before operating the Zero X/MX motorcycle, check the
following to make sure the motorcycle is secure and
intact:
•
Power Pack
Make sure the onboard energy gauge is green,
indicating a charged power pack. If the
energy gauge reads below 3 bars (1/2) amber or
red, we suggest you recharge before use.
•
Drive Chain
Check chain slack and condition. Adjust and
lubricate if necessary. The drive chain must be
cleaned and lubricated at the intervals specified in
the maintenance schedule. Otherwise, it will
quickly wear out, especially when riding in dusty
or wet areas. See Chain on page 5-8.
•
Brakes
Squeeze each brake lever individually and push
the motorcycle to see if it rolls. You should be
able to lock-up the wheels completely by applying
the brakes.
•
Throttle
With the key switch in the OFF position, twist the
throttle and release to verify that the throttle is
smooth and returns correctly.
•
Tires
Check both tires for condition and tread depth.
Check cold tire pressure frequently. Check for
damage and alignment. Maintain correct tire
pressure as specified on page 5-8. Replace the
tires when the tread height is 2 mm (0.08 in) or
less.
CAUTION: Under-inflation is the most common cause
of tire failure and may result in severe tire cracking,
tread separation, “blowout,” or unexpected loss of
motorcycle control causing personal injury and
possible death.