Zero 88 ORB, Быстрый старт

Страница: 27 / 36

Naming Palettes
As well as containing channel data a palette can have a name associated with it. To assign a name to a palette enter
the command:
COLOUR n NAME {your name} ENTER
These names are displayed in the palette windows and in the command line when a palette is accessed.
Outputting Palettes
The act of outputting a palette causes the selected fixtures to move to the value stored within that palette.
To apply or output a palette first select a fixture or group of fixtures.
Enter the command COLOUR n ENTER
The fixture(s) will change to the colour they were in when the palette was stored.
If any of the selected fixtures are not actually programmed in the applied palette, but there are one or more fixtures of
the same type that are programmed, the fixture will use the values programmed for the first fixture of the same type.
If the fixture data in the programmer is then recorded into a cue, submaster or UDK, the desk will record the palette
reference rather than the actual parameter value. This is especially useful for touring shows when using positions, to
save updating each cue individually.
Automatic Palettes
In Setup, there is an option to generate a set of automatic palettes based on the fixture types in the schedule. The desk
generates palettes for a range of useful things based upon your current patch.
To create the automatic groups, first enter SETUP, press the [Auto Menus] soft key on the monitor, select the [Create
Auto Palettes] option, then exit Setup.
Palettes
25