Zero 88 Lightmaster XLS, Руководство пользователя

Страница: 9 / 38

Programming the Memory
The memories in the Lightmaster XLS are
arranged in 9 pages, each of 24 memories. The
B Preset Faders become 24 Memory Masters In
Run and Program Mode. This provides an easy
way of recording up to 216 scenes which would
otherwise have to be set up manually on the
Presets. Any scene may be previewed (indicated
on the Preview lights), before it is output.
Programming
In Program Mode, the Program light is on, the
scene to be recorded is set up on the desk
outputs. The faders of Preset A are usually used,
but the action of programming records all outputs
at that time. Whether from Memory Master,
Presets or Effects Master, but not Auxiliary
Memories. Any number of channels at any level
may be assigned to each memory. To program,
select the Memory Page using the +/- buttons,
then press the appropriate Memory.
Flash/Preview button to select the memory you
wish to program. Observe the appropriate
program light flashing also. The continuosly lit
channel preview lights show what is in the
memory now. Press the Program button to record
the new scene. Channel information in a memory,
is shown on the Preview lights each time the
memory is selected.
Programming Controls
PAGE + / - :
Selects Memory Page to be programmed.
PROGRAM:
Records levels currently output to memory.
PRESET A:
Sets individual channel levels for programming
FLASH / PREVIEW BUTTONS:
Select one of the 24 memories on each Page to
be programmed.
MEMORY CONTROL:
The four lights above show whether the numeric
display is showing the Memory Page, the DMX
Channel, MIDI information or Preset A fader
level.
p8/4
NOTES
* Ch’ in Page display
This indicates “Channels”. ‘Ch’ is a preprogrammed memory
with Channel 1 permanently assigned to Memory Master 1,
Channel 2 to Memory Master 2 and so on. These memories
can be used to replicate two preset operation or to easily
provide the facility of fading, flashing or soloing a single
channel. If page ‘Ch’ is previewed, the display changes to
‘PC’. Programmable Memory Pages are numbered 1 to 9.
There is more about ‘Ch’ on page 9.
* Error Messages
These are listed on page 33.
* Memory Master Faders
Used for outputting a previously memorised scene.
* Recording of Output
When the Program button is pressed, the state of the outputs
is recorded. If one or more Memory Masters are outputting a
memory with outputs from Preset A, the complete resultant
scene is recorded.
* Preview lights
come on for each channel recorded over 5%.
* Preset A level Match
The display is not effected by Master A or Grand Master
control. Available in Presets, Run and Program Mode only.
see page 11.
Programming the Memory
Page 8
7359700/p8/4