Zeppelin Design Labs VPM-1, Инструкция по сборке

Страница: 49 / 56

49
MAIN BOARD & CHASSIS
1. Now it’s time to put the main board in the chassis. Solder the wires coming from the DC jack to
the “+9V” pads on the main PCB (169,170). The red wire goes to the square pad and the black
wire goes to the round pad. Don’t mix them up or your VPM-1 won’t work!!
169 170
2. Line up the jacks, knob, switch, and LED to their holes in the chassis. You may have to gently prod
the LED and tact switch to line up to their holes with some tweezers or other small tool (171). Once
the chassis is seated properly, place the washers and nuts on the jacks and tighten them down with
a 1/2” (12mm) socket (172,173).
171 172
173