Zeppelin Design Labs VPM-1, Инструкция по сборке

Страница: 42 / 56

42
PUTTING IT ALL TOGETHER
CHASSIS
1. Labels
a. Use some isopropyl alcohol and a rag to clean the chassis of grease and dust.
138
b. Remove the backing paper from the label and very carefully align it to the holes in the
chassis (139,140). Don’t let it touch the chassis until you are ready to stick it in place. Once
it’s aligned properly press one edge of the label down firmly and work your way to the
opposite edge, to prevent any air bubbles from getting trapped under the label. If any of the
holes are misaligned, you can cut out the label from the hole with an X-acto knife (141).
139 140
141