ZEPIRO D2O FL1, Руководство по эксплуатации продукта

Страница: 22 / 36

18 - D2O FL1 Product Manual
6.1 INTRODUCTION
This section provides information on all of the Serial Commands that may be
entered into the CLI.
When entering any command (and any relevant parameter) it must be
followed by a carriage return control character, which is sent by pressing the
Enter key on the user’s keyboard.
The commands are case sensitive with some characters used in both upper
and lower case forms.
Dates and times used for the D2O are all based on Greenwich Mean Time
(GMT).
The commands are split into category groups as follows:
GROUP DETAILS
-
Admin Parameters
sys D2O Unit System Parameters
time
System Time Parameters
gps
Global Positioning System (GPS) Parameters
acq
Data Acquisition and Configuration Parameters
msg
Satellite Network Coverage and Transmission Parameters
inp
External Device Input Parameters
The full list of available commands is shown below. The Commands are
shown in
Bold
text and available Parameters are shown in
Regular
text
within brackets < > . Detailed information about each command can be
found in the “COMMAND DETAILS” section:
6.2 COMMAND LIST
COMMAND SYNTAX DETAILS
help
Displays a list of all available commands
help <cmd>
Provides information about a particular command, where
<cmd>
is the command of
interest.
admin <password>
Allows administrator access to modify the Admin Restricted editable parameters of the
device. All Admin Restricted parameters will be unavailable until this command is applied.
The default password is password
apply <A or D or F>
Accepts (
A
) or Discards (
D
) changes made to Admin Restricted settings of
acq
and
inp
commands when administrator access has been enabled. Parameter
F
restores all
modified parameters to their factory defaults.
report
Displays a Commissioning Report of all key parameters currently set on the D2O.
Admin Parameters