Zenoah EBZ7500, Руководство по ремонту

Страница: 39 / 60

-３７-
7
.
Notice of Reassembly
7-16 Recoil Starter Assembly
1. Wind up the return spring while winding it inside
as shown.
NOTE:
Wind up the return spring so that the outer
diameter
becomes 65 mm or less .
2. Set the return spring which has been wound to
the recoil case.
NOTE:

Securely insert the spring hook (a) of the
return spring into the groove of the recoil
case. Make the gap of the spring hook (b)
and the boss of the recoil case about 2mm.

Apply grease to the boss.
Grease:
Cold-resistant grease No. 2 or equivalent
3. Insert a rope through the reel as shown in the
figure and tie a knot at position of about 30mm
from the end of the rope. Push the knot of the
rope in the groove of the reel.
Round the end of the rope and push it into the
groove of the reel with the knot.
Reference:
This model uses rope size of
φ
3.8
×
750-
850mm
30mm
Rope
Reel
Knot
Groove
Hook (a)
Boss
Hook (b)
2mm
Recoil Case
Return Spring
Wind up.
65 mm or less