Zenoah EBZ7500, Руководство по ремонту

Страница: 23 / 60

-２１-
6. Notice of Teardown
6-1 Guard Net Removal
The guard net is mounted by four clips. The removal
procedure is shown below.
1. Loosen the resin screw of the clip and remove it
completely.
NOTE:
When loosening the resin screw, securely fit
the Phillips screwdriver into the (+) of the
screw head. If not fitted, the screw head will
be damaged.
2. Insert the flat tip screwdriver between the guard
net and the frame, twist the screwdriver to pull out
the clip, and remove the guard net from the
frame.
NOTE:
Do not damage the guard net and frame with
the screwdriver.
6-2 Lower Damper Removal

Remove the volute case from the frame.

Remove the cover and pull out the lower damper
from the groove of the volute case.
Clip
Flat Tip Screwdriver
Resin Screw
Guard Net
Volute Case
Screws (3)
Cover
Lower Damper
Frame
Mounted positions (4)