1375 Hird Ave., Cleveland, OH 44107 • Phone (216) 521-8567 • Fax Local 521-9476 / USA & Canada (800) 344-9191
E-Mail: [email protected] •
Website: www.martindaleco.com
MODEL G BLOWER
INSTRUCTIONS
OPERATION:
To use as blower, attach the tapered nozzle to the discharge opening of the blow-
er, and the protective screen lock to the air intake opening.
To use as a suction cleaner, attach the dust bag to the air discharge opening.
Remove the protective screen lock from the air intake opening and attach the
swivel end of the hose by turning the swivel untill it is secure. Attach the desired
nozzle to the other end of the hose.
MAINTENANCE:
The carbon brushes should be checked periodically and replaced when worn
down to approximately 3/8” long. To check the brushes, unscrew the screws hold-
ing the brush cap guard. Unscrew the brush cap and remove the brushes. Be
sure to note position of the brushes when they are being removed so that if they
are still of sufficient length they can be reassembled in the same position.
The bearings are prelubricated and sealed and do not require further lubrication.
