![background image](http://html1.mh-extra.com/html/zenoah/bht250pd60/bht250pd60_workshop-manual_3405385016.webp)
6. Put in the connector (A).
A
5.10 Main switch and main cable
5.10.1 To disassemble the main switch
1. Remove the control handle.
2. Remove the power trigger lock and power trigger.
See
To disassemble the power trigger and handle
stop on page 11
3. Lift out the main switch and disconnect cable (A).
A
4. To disconnect the cable, release the catch (D) with a
small screwdriver and pull the connection (C) out.
C
D
5.10.2 To assemble the main switch
1. Connect cable (A) and make sure that the contact
clicks into place.
A
2. Assemble the throttle trigger lock and throttle trigger.
3. Assemble the control handle.
5.11 Rear handle
5.11.1 To disassemble the rear handle
WARNING: Make sure the spring does not eject
out and causes injury. Put on protective
goggles.
CAUTION: Do not to damage the cables or the
plugs.
CAUTION: The flat cable to the keypad is very
easily damaged.
16 - Repair instructions
620 - 002 - 29.01.2019
Содержание BHT250PD60
Страница 1: ...Workshop manual BHT250PD60 English 620 002 29 01 2019...
Страница 26: ...26 Technical data 620 002 29 01 2019...
Страница 27: ...620 002 29 01 2019 Technical data 27...
Страница 28: ...www zenoah com 114 04 71 26 2019 01 30...