Z41 Pro / Lite / COM
http://www.zennio.com
Tecnical Support:
http://support.zennio.com
112
Prior to detailing the elements shown in the pop-up window, the ETS parameters for this
type of function are described next:
Measurement Type
: sets whether the values received refer to electric power or
water/gas flow. Both are managed analogously; however the units of
measurement and the parameter/object names will differ.
➢
If “Power”, specific parameters will show up to set the
electric power units
(kW or W) and whether the accumulated energy consumption should be
shown within the pop-up window (and, if so, the
energy measurement
units
: kWh or Wh).
Figure 109
Energy consumption monitor.
➢
If “Water/Gas”, two specific parameters will show up to set the
water/gas
flow units
(litres per hour or m
3
por second) and whether the accumulated
volume should be shown within the pop-up window (in such case, the
volume units
will be m
3
, as defined by the KNX standard).
Figure 110
Water/Gas Consumption Monitor.
The electric power or water/gas flow measurement reports should be received,
respectively, through objects
[Pn][Bi] Consumption Monitor: Power
and
[Pn][Bi]
Consumption Monitor: Flow
.
The energy or water/gas volume consumption reports should be received, respectively,
through objects
[Pn][Bi] Consumption Monitor: Energy
and
[Pn][Bi] Consumption
Monitor: Volume
.
