Zennio MAXinBOX FC 0-10V FAN, Руководство пользователя

Страница: 5 / 46

MAXinBOX FC 0-10V FAN
http://www.zennio.com Technical Support: http://support.zennio.com
5
5
1 INTRODUCTION
1.1 MAXinBOX FC 0-10V FAN
MAXinBOX FC 0-10V FAN from Zennio is a versatile KNX multi-function actuator that
aims at fulfilling the climate control needs of KNX environments with integrated fan coil
units where the fan speed is controlled through an analogue 0-10 VDC signal , while
the gates of the water pipes need to be controlled through binary outputs (relays).
The actuator provides two analogue outputs and four binary outputs, all of which can
be enabled and configured independently , which lets the integrator combine them
as desired to control up to 2 two-pipe or four-pipe fan coil units.
At a glance, the most outstanding features of MAXinBOX FC 0-10V FAN are:
2 independent analogue 0-10 VDC outputs ,
4 independent binary (relay) outputs ,
2 independent fan coil functions , to control up to two fan coil units by
means of the above analogue and binary outputs.
4 multi-purpose inputs , each of them configurable as:
➢
Temperature probe,
➢
Binary input (i.e., pushbuttons, switches, sensors),
➢
Motion detector.
10 customisable, multi-operation logic functions .
2 independent thermostats .
Manual operation / supervision of the relay outputs and the 0-10 VDC
signals through the on-board pushbuttons and LEDs.