MAXinBOX FC 0-10V FAN
http://www.zennio.com
Technical Support:
http://support.zennio.com
11
11
2.2
INPUTS
MAXinBOX FC 0-10V FAN incorporates
two analogue/digital inputs
, each
configurable as a:
Binary Input
, for the connection of a pushbutton or a switch/sensor.
Temperature Probe
, to connect a temperature sensor from Zennio.
Motion Detector
, to connect a motion detector (models ZN1IO-DETEC-P
and ZN1IO-DETEC-X from Zennio).
Important
:
Older models of the Zennio motion detector (e.g., ZN1IO-DETEC
and ZN1IO-DETEC-N) will not work properly with this device.
2.2.1
BINARY INPUT
Please refer to
the “
Binary Inputs
” user manual, available under the MAXinBOX FC 0-
10V FAN product section at
www.zennio.com
.
2.2.2
TEMPERATURE PROBE
Please refer to the “
Temperature Probe
” user manual, available under the MAXinBOX
FC 0-10V FAN product section at
www.zennio.com
.
Note: This device does not include support for custom NTC probes.
2.2.3
MOTION DETECTOR
It is possible to connect motion detectors (models
ZN1IO-DETEC-P
and
ZN1IO-
DETEC-X
from Zennio) to the input ports of MAXinBOX FC 0-10V FAN. This brings the
device with the possibility of monitoring motion and presence in the room, as well as
the light level. Depending on the detection, different response actions can be
parameterised.
P
lease refer to the “
Motion Detector
” user manual, available under the MAXinBOX FC
0-10V FAN product section at
www.zennio.com
, for detailed information about the
functionality and the configuration of the related parameters.
