Zennio KLIC-DI, Руководство по эксплуатации продукта

Страница: 3 / 27

ZENN
iO AVANCE Y TECNOLOGÍA www.zennio.com
3
1. INTRODUCTION
The KLIC-DI is an interface that allows a bidirectional communication between a
KNX domotic system and the commercial air-conditioning units of the series Sky Air
manufactured by Daikin.
Due to this bidirectional communication, the air conditioning unit can be controlled
in the same way that using an IR remote controller and the real status of the air-
conditioning unit is checked and sent to the KNX bus for its monitoring.
Figure 1 KLIC-DI
In case of using a wired remote control in the same communication bus of the unit,
the KLIC-DI will communicate with this remote control acting one device as master
control while the other device will act as slave control. It is important to verify that the
KLIC-DI and the wired remote control are configured with different type of control. This
way, the control acting as slave will update its status when the master orders it and will
communicate its status changes when they are modified from the own slave control.
Device Features:
Small enclosure: 90 x 60 x 35 mm (2 DIN rail units)
Designed to be installed inside distribution boxes or electrical mounting boxes.
KLIC-DD controls commercial and industrial air conditioners (bi-directional
communication) of the series Sky Air and VRV from Daikin.
Daikin control protocol.