Zennio KLIC-DI, Руководство по эксплуатации продукта

Страница: 15 / 27

ZENN
iO AVANCE Y TECNOLOGÍA www.zennio.com
1
5
of telegrams with this temperature, it has been implemented this parameter. This way,
the indoor temperature will be sent every certain period of time specified with this
parameter and only if the temperature has changed.
4.3. MODE
As it has been previously seen in the default configuration, the specific Mode
window allows the user select:
Individual Modes
When selecting the “Individual Modes”, two 1-bit communication objects will be
enabled, one for controlling the mode and another one for receiving the status
from the split, for each mode (Auto, Cool, Only Fan, Heat and Dry) besides the
1-byte communication objects for controlling and indicating the Mode that exist
by default.
If the option “Individual Modes” is activated, the operating mode of the machine
will be sent by means of the 1-bit Sending object associated to the mode.
Moreover the Mode will be also sent to the bus KNX by means of both the 1-
byte Mode objects for controlling and indicating the status of the corresponding
mode.
Simplified Modes
The selection of the “Simplified Modes” will enable a 1-bit communication object
with the same name that will allow choosing between Mode Cool (value 0) and
Mode Heat (value 1).
For this communication object, the corresponding status communication object
does not exist.
Figure 9 Mode
4.4. FAN SPEED
In this window it can be selected the number of fan levels that the air conditioning
unit has: 2 or 3 levels besides the auto level.