Zennio KLIC-DI, Руководство по эксплуатации продукта

Страница: 13 / 27

ZENN
iO AVANCE Y TECNOLOGÍA www.zennio.com
1
3
As we can see in the previous figure all the advanced functionalities: scenes,
temperature limitation, auto switch off, errors management and initial configuration are
disabled by default.
If the Mode and Fan are selected, it will be seen that both the Individual Modes and
the Simplified Modes (Cool/Heat) are disabled by default while the Fan is configured for
2 different fan speeds and the step control is also disabled.
In the next figure, it can be watched the available communication objects by
default: they allow sending the ON/OFF to the Split, setpoint temperature, mode and
fan speed (two speeds), as well as receiving the status of these variables from the
Split.
Figure 6 Default Fan Configuration
Figure 5 Default Mode Configuration
Figure 7 Default Communication Objects