Zennio IDAC, Руководство пользователя

Страница: 10 / 29

IDAC
https://www.zennio.com/ Technical Support: https://support.zennio.com/
10
Proximity Sensor [ disabled/ enabled ]: enables the proximity sensor. This
functionality permits “waking up” the device when detecting presence through
the proximity sensor
Please refer to the user manual
“Proximity and Luminosity Sensor”
(available in the IDAC product section at the Zennio homepage,
www.zennio.com ) for detailed information about the functionality and the
configuration of the related parameters.
Ambient Luminosity Sensor [ disabled /enabled ]: enables or disables the
“Ambient Luminosity Sensor” tab in the tree on the left. See section 2.2.6 for
details.
Inactivity:
➢
Initial State (After Download) [ Inactivity / Activity ]: determines whether
the internal module should be started in activity state after a download.
➢
Time to Consider Inactivity [ 1
…65535
] [ s/ min /h ]: time that must elapse
since the last press and/or proximity detection to consider inactivity state
and to set the configured brightness level. See section 2.2.2.
The project topology always shows the following objects:
“[In] Activity”
: 1-bit object to force activity/inactivity state on the device. For
further information, please refer to the user manual “
Proximity and
Luminosity Sensor
” and “
Brightness
” (available in the IDAC product
section at the Zennio homepage, www.zennio.com ).
"[In] Sounds - Disabling Button Sound" : 1-bit object to mute the button
sounds.
“[In] Proximity Sensor”
,
“[In] External Proximity Detection”
and
“[In]
Pro
ximity Detection”:
1-bit object whose functionality is tied to the proximity
sensor. For further information, please refer to the user manual “
Proximity
and Luminosity Sensor
” (available in the IDAC product section at the
Zennio homepage, www.zennio.com ).