Zennio IDAC, Руководство пользователя

Страница: 22 / 29

IDAC
https://www.zennio.com/ Technical Support: https://support.zennio.com/
22
➢
Switch:
•
Action [ Send 0 / Send 1 / Toggle 0/1 ]: sets the value to be sent to the
bus (through object “ [Out][Doorbell] Switch: “X”
) when the user
touches the button.
➢
Hold & Release
•
Action on Hold / Release [ Send 0 / Send 1 ]: sets the value to be
sent to the bus (through
“[Out][Doorbell] Hold & Release”
) when
the user touches or releases the button, respectively.
Press Detection Delay [
1…
2
…255
] [ x1 ds ]: during this time, no press will be
considered.
LED State [ Off / On ]: sets whether the button LED will be off or on,
illuminated at the level set in the "Brightness" tab (see section 2.3.3). If "On"
is selected, the LED Color parameter will be enabled, allowing you to choose
the desired color.
2.3.5 TOUCH LOCKING
Functionality analogous to that described for the Outdoor Module (see section 2.2.4).
2.3.6 SOUNDS
The Outdoor Module of IDAC emits two types of sounds , depending on the action
performed:
Sending Confirmation : a short and sharper beep than the previous one. It
indicates the sending of an object to the bus as a result of a press. The range
of sounds emitted when this action is performing will be different depending
on the sound type selected (see section 2.1).
Access granted: indicates to the user that the card he has just detected has
the access allowed to the room.
Access denied: indicates to the user that the access attempt with the
current card has been denied.