ZENN
iO
AVANCE Y TECNOLOGÍA
vwww.zennio.com
13
Multiply:
it allows progressively increasing (multiply), in execution time, the On
Duration or the On/Off delays. I.e., when enabling this function, ACTinBOX MAX6
multiplies the defined times as many times as the value "1" or "0" is received through
the "[OX] Timer" object. Two situations are distinguished:
-
No multiply:
if during a temporized ON, ACTinBOX MAX6 receives a "1"
through the object "[OX] Timer", it starts counting again the time set in the On
Duration field.
-
Multiply
: the timing applied to the output is multiplied by "n" when receiving "n"
times the timed order through the corresponding object, before the
parameterized time for the timer ends.
Flashing
(See figure 3.6). This function is meant for the output to run the sequence
ON-OFF-ON-OFF … when needed. It can be parameterized an ON and an OFF Duration,
as well as the number of repetitions in the sequence (for an unlimited value, set 0 in this
field: the sequence will repeat indefinitely, until a “0” is received through the
communication object “[OX] Flashing”).
It can be also defined the status of the output after the last repetition (ON or OFF).
Figure 3.6. Timers screen: Flashing
It is
important
to know that ACTinBOX MAX6 allows parameterizing both a simple timer and a
flashing for the same output.
Scenes:
Scenes consist of a synchronized activation of some devices in the domotic
installation, so that different predefined atmospheres are generated.
