Zenith P50W28A Series, Инструкция по установке и эксплуатации

Страница: 6 / 32

6
Monitor Controls
Connection Options
VOL. MENU INPUT SELECT
ON/OFF
Main Power Button
INPUT SELECT Button
VOLUME (
F
,
G
) Buttons
Power Standby Indicator
Illuminates red in standby mode,
Illuminates green when the
Monitor is turned on
Remote Control Sensor
MENU Button
E
,
D
Buttons
Y P
B
P
R
( ) ( ) R
(MONO) R AUDIO
ON/ OFF
L R
AUDIO
L
( ) ( ) L
AC INPUT (8
Ω
) EXTERNAL SPEAKER
COMPONENT
(DVD/DTV INPUT)
RGB1 OUTPUT
(PC/DTV OUTPUT)
LOCK
REMOTE
CONTROL
CONTROL
RGB1 INPUT
(PC/DTV INPUT) INPUT
AUDIO
INPUT
AUDIO
INPUT
AUDIO
INPUT
VIDEO
RGB2 INPUT
(DIGITAL RGB INPUT)
RS-232C INPUT
(CONTROL/SERVICE)
S-VIDEO
EXTERNAL SPEAKER
1 2 3 4 7 8 5 6 1
1. EXTERNAL SPEAKER (8 ohm output)
Connect to optional external speaker(s).
* For further information, refer to ‘Speaker & Speaker Stand’
manual.
2. POWER CORD SOCKET
This Monitor operates on an AC power. The voltage is indi-
cated on the Specifications page. Never attempt to operate
the Monitor on DC power.
3. AUDIO/VIDEO INPUT JACKS
Connect audio/video out from external equipment to these
jacks.
S-VIDEO INPUTS (S-VIDEO)
Connect video out from an S-VIDEO VCR to the S-VIDEO
input.
4. COMPONENT (DVD/DTV INPUT)/AUDIO INPUT JACKS
5. CONTROL LOCK Switch
REMOTE CONTROL
When “CONTROL LOCK” is set to “ON”, Monitor is operat-
ed by the external control device.
6. RGB1 OUTPUT (PC/DTV OUTPUT) JACKS
You can watch the RGB1 signal on another monitor, con-
nect RGB1 OUTPUT (PC/DTV OUTPUT) to another moni-
tor’s PC input port.
7. AUDIO INPUT/RGB1 INPUT (PC/DTV INPUT)/
RGB2 INPUT (DIGITAL RGB INPUT) JACKS
Connect the monitor output connector from a PC to the
appropriate input port.
8. RS-232C INPUT (CONTROL/SERVICE) PORT
Connect to the RS-232C port on a PC.
Front Panel Controls
Back Connection Panel