Zenith P50W28A Series, Инструкция по установке и эксплуатации

Страница: 14 / 32

14
Turning on the Monitor
- When using the remote control, aim it at its sensor on the Monitor.
Turning on the Monitor just after installation
Turning on the Monitor (power cord is still connected)
1. Connect power cord correctly.
2. Press the ON/OFF button on the Monitor. At this moment, the Monitor is switched to
standby mode. Press the INPUT SELECT button on the Monitor or press the POWER,
INPUT SELECT button on the remote control to switch the Monitor on.
• Press the ON/OFF button on the Monitor to turn the Monitor on.
1. If the Monitor was turned off with the ON/OFF button on the Monitor
2. If the Monitor was turned off with the remote control and the ON/OFF button on the Monitor
• Press the ON/OFF button on the Monitor and then press the INPUT SELECT button on the
Monitor or press the POWER, INPUT SELECT button on the remote control to turn the Monitor on.
Menu Language Selection
- The menus can be shown on the screen in the selected language. First select your language.
1. Press the MENU button and then use
D
/
E
button to select the SPECIAL menu.
2. Press the G button and then use
D
/
E
button to select
LANGUAGE
.
3. Press the G button and then use
D
/
E
button to select your desired language.
From this point on, the on-screen menus will be shown in the language of your choice.
4. Press the MENU button.
한국어
VIDEO
AUDIO
TIME
SCREEN
TWIN
SPECIAL
LANGUAGE G
KEY LOCK
ORBITER
WHITE WASH
SET ID
OSD ROTATE
ENGLISH
ESPAÑOL
PORTUGUÊS
FRANÇAIS
MENU PREV.