Installer Menu
P A G E 4 6
Typical Installer Menu
L26W58XX PTC INSTALLER MENU
000
INSTALLER SEQ
000
UPN
000-000-000-000
FPGA 09F1
PTC V1.00.000
CPU V1.01.00
Use the Installer’s Menu to set up or change operational settings.
See more detailed descriptions of the Installer menu items on the following pages...
Accessing the Installer’s Menu
Make sure TV is on. Installer’s menu items can be accessed by using an installer’s remote
control. Just press MENU repeatedly (at least 10 times) until the TV seems to stop
responding, then press 9, 8, 7, 6, then ENTER to access the Installer’s menu. To remove
the Installer’s menu, press ENTER again.
Any changes you make will be stored in non-
volatile memory. (The menu also disappears automatically.)
The Installer’s menu opens with item 000 INSTALLER SEQ 000. Use the Up/Down arrow
keys to sequence through the available menu items. Or, access an item directly by keying
in the line number, then pressing MENU. For example, to access the Sleep Timer option
which is item 015, press 0-1-5, then MENU. To change a setting, use the Left/Right
arrow keys. Or, enter a value directly.
Using the Installer’s Menu
Items 000 ~ 117 are immediately accessible only upon entering the Installer’s Menu.
Their numbers, descriptions, ranges, factory default settings, and a place for listing any
changes made on-site are given below and on the following pages.
Installer Menu Items 000 through 117
Menu Item
Function
Value Range
Default Value
Brief Description of Function and Comments
000
INSTALLER SEQ
0 ~ 3
0
Leave default set to 0.
001
POWER MANAGE
0 ~ 7
0
Sets number of hours of no activity before auto shut Off.
002
AC ON
0 / 1
0
Set to 1 to enable auto turn On at power up.
003
BAND/AFC
0 ~ 3
1
Selects Tuning Band: 0=Broadcast, 1=CATV, 2=HRC, 3=IRC
004
STRT CHANNEL
0~125, 126, 127, 255
255
Channel at turn-on (Set 255 to return to last channel before power Off).
005
CHAN LOCK
0 / 1
0
If set to 1, cannot tune from current channel.
007
STRT VOLUME
0 ~ 63, 255
255
Sets Volume level at TV turn-on (Set 255 to retain last volume level).
008
MIN VOLUME
0 ~ 63
0
Sets minimum allowable volume setting.
009
MAX VOLUME
0 ~ 63
63
Sets maximum allowable volume setting.
010
MUTE DISABLE
0 / 1
0
Set to 1 to disable mute function.
011
KEY DEFEAT
0 / 1
1
Set to 1 to disable menu navigation keys on display panel.
012
IR BANKS EN.
0 / 1
0
Set to 1: enables TV to respond to IR code
013
SCAN MODE
0 / 1
1
Typically used for Hospitals: puts On-Off and FM in Ch Up/Down sequence.
014
STRT CH IN SM
0 / 1
0
Set to 1 to put TV on/off below start channel number.
015
SLEEP TIMER
0 / 1
1
Set to 1 to enable Sleep Timer.
016
EN TIMER
0 / 1
1
Set to 1 to enable On/Off Timers.
017
ALARM
0 / 1
1
Set to 1 to enable Alarm.
020
FEATURE LEVEL
0 / 1
1
Zen 1 Leave default set 1 (1 Zen 1)
021
V-CHIP
0 / 1
1
Set to 1 to enable V-Chip functions.
022
MAX BLK HRS
0 ~ 99
12
Sets number of V-Chip (Parental Control) blocking hours.
023
CAPTION LOCK
0 / 1
0
Set to 1 to retain caption setting at power Off.
025
FUNCTION PRE.
0 ~ 3
1
Controls channel preview in Pay-Per-View function
027
HOSPITAL MODE
0 ~ 2
2
Leave default set to 2.
028
CH. OVERIDE
0 / 1
1
If set to 0, limits direct access to favorite channels.
029
OLD OCV
0 / 1
0
Set to 1 to change M.P.I. operation to OCV.
030
ACK MASK
0 / 1
0
If set to 1, changes M.P.I. for some OCV boxes.
031
POLL RATE
20 ~ 169
94
Selects poll rate for M.P.I.
032
TIMING PULSE
186 ~ 227
207
Sets baud rate for M.P.I.
034
CAMPORT EN
0 / 1
1
Set to 1 to enable Video 2 input.
