Cloning Connections / Teaching Setup
P A G E 4 5
Teaching the Master Setup to Another L26W58HA
Connections for the LT2002 to Teach another L26W58HA the Master Setup
Teach Master L26W58HA’s Setup to the target
L26W58HA
After learning is complete, remove the M.P.I. cable from the
master L26W58HA and connect it to the target L26W58HA that
you want to copy the master L26W58HA’s setup into. With “THE
CLONE HAS CONTROL OF TV” message displayed, press 2 to go to
the “TEACH TO TV” option, press ON/OFF, POWER, or ENTER.
Select the LT2002 memory that the new setup is in. Press
On/Off to transfer the new setup and other information to the
new L26W58HA. Teaching usually takes 2-3 minutes.
After the “TEACHING COMPLETE” message is displayed, press any
key to return to the Clone menu, then press ON/OFF, POWER, or
ENTER. If finished, detach M.P.I. cable from the target, newly
cloned L26W58HA.
Disconnect L26W58HA Power for 15 Seconds
Unplug the AC power cord of the newly cloned L26W58HA from
the power outlet for about 15 seconds to activate the newly-
copied setup.
CLONE SELECTION MENU
(1) LEARN FROM TV
(2) TEACH TO TV
(3) SET CLONE CLOCK FROM TV
(4) SET TV CLOCK FROM CLONE
(5) DISPLAY TV SETUP
(6) DISPLAY CLONE SETUP
- TO CHANGE MENU ITEMS, PRESS
CHANNEL KEYS OR DIGITS.
- TO EXECUTE ITEM, PRESS ON/OFF,
POWER, OR ENTER
TEACHING IN PROGRESS,
PLEASE WAIT
TEACHING COMPLETE
This menu should appear after any key is
pressed on the Installer remote.
This display will appear during Teaching
function.
This display will appear after Teaching is
complete.
Clone Programmer
Master L26W58HA
Ferrite Core
(TDK, ZCAT
2035-0930)
Antenna
or CATV
