Auto Program (Channel Search)
P A G E 2 1
With the optional Installer remote control in hand, press
the
POWER
key to turn the TV on.
Press the
MENU
button and then use the
D
/
E
ADJ
button
to select the Channel menu.
Press
OK (Enter)
.
With Auto Program highlighted, press the
OK (Enter)
button.
Press the
OK (Enter)
button to start the channel search.
After finding all available channels, a display appears
briefly showing the number of analog and digital channels
Press the
MENU
button repeatedly to remove the menus.
With the optional Installer remote control in hand, press
the
POWER
key to turn the TV on.
Press the
MENU
button and then use the
D
/
E
ADJ
button
to select the Channel menu.
Press
OK (Enter)
.
With Auto Program highlighted, press the
OK (Enter)
button.
Press the
OK (Enter)
button to start the channel search.
After finding all available channels, a display appears
briefly showing the number of analog and digital channels
Press the
MENU
button repeatedly to remove the menus.
1
2
3
4
5
6
Use Auto Program to automatically find and store all of
the channels available in the selected Tuning Band.
*Note:
Tuning Band must be set before doing the channel search. See
Installer menu item 003 Band/AFC. Default setting is 1, for CATV. When
Auto Program is run, any assigned channel labels are automatically
removed.
Auto Program finds channels being received
by the TV’s analog and digital tuners.
Cable will not work unless you subscribe to
a cable service.
Channel
Antenna
Auto Program
G
Channel Label
Channel List
Fine Tune
Signal Strength
--:-- --
--. -- ----
Antenna
Auto Program
Channel Label
Channel List
Fine Tune
Signal Strength
--:-- --
--. -- ----
