Page 28 of 36
802253NZ - HydroTap BC, BCHA-AV, AIO, Installation Instructions - Aug 2015 - V2.01
If an external filter is installed, select position B
B
Rotate 90°
only
1
2
3
4
Check the table below to determine which filter bypass position you need for your product.
Note:
Before you install a unit, determine whether a water softener or an external filter is required.
4.1
E
xternal Bypass Valve
The diverter bypass valve allows the user to choose to have the boiling water filtered either by the internal or by
an optional external filter.This diverter valve is located at the rear panel of the Zenith HydroTap undersink unit
on the filter door side, see the image below.
4.2
Hose and tube fitting.
(Do not overtighten)
•
Remove all caps from the top of the undersink unit
•
Install the mains water braided hoses to the undersink unit before locating the unit in place.
Section 4
Undersink Unit Installation
If no external fi lter is installed, select position A
A
Rotate 90°
only
1
2
3
4
NO EXTERNAL
FILTER INSTALLED
SELECT POSITION A
EXTERNAL
FILTER INSTALLED
SELECT POSITION B
B
1
2
3
4
A
1
2
3
4
PN: 801231
