Page 16 of 36
802253NZ - HydroTap BC, BCHA-AV, AIO, Installation Instructions - Aug 2015 - V2.01
1.12
Installing the Mixer Tap
(Classic, Arc and Cube)
Installation Instructions
Sink top
O-ring
Lower seal
Washer
Securing nut
Mixer tap
Arc Mixer Tap
•
Fit the O-ring into the recess on the underside of the Mixer tap. (Note: If mounting on an uneven
surface, a light smear of silicone on the O-ring will ensure a water tight seal)
•
Pass the tap tubes and threaded extension through the 35mm hole and position the tap so that it
discharges into the sink.
•
Fit the lower rubber seal to the threaded extension.
•
Secure the tap in position with the metal washer and Nut.
•
Affix the three hoses to the tap. Match the hose colours to the coloured bands on the copper extension
tubes. (See diag. 1.11)
