802253NZ - HydroTap BC, BCHA -AV, AIO, Installation Instructions - Aug 2015 - V2.01
Page 25 of 36
Section 3
Booster Heater
Mount base
Horizontally
3.1
Product Description
The boost unit is a compact electronically
controlled auxillary water heater. It is intended to
provide pre heating of water before it enters the
Zenith HydroTap G4 boiling tank. The Booster is
supplied as standard equipment with all 4-In-1
& BCHA-AV models. However, it may be later
installed, as an accessory to increase boiling
water delivery.
280mm
Note1:
water connection
:Blue marking - water in
:Red marking - water out.
The tbraided hoses cannot
be lengthened.
Note2:
The electrical cable
length is 1.0 metre.
Note3:
Position the Booster
within reach of the fixed hose
lengths, keeping the Booster
as close as possible to the
undersink unit inlet/ outlet
fittings.
Note4:
Ensure the Booster
heater is mounted in an
upright position (as shown)
with a horizontal base
Booster Specifications:
Rating
Unit
Nominal Power Rating
2.2
kW
Nominal Current
10
A
Electric Supply 50Hz AC
230
V
Elect fl ex and plug (black) - 1 meter length (with 90º Aus-
tralian plug)
10
A
Fixed Flow Rate
1.2
L/min
Minimum water pressure
200
kPa
