Zenith HDV420, Инструкция по установке и эксплуатации, Гарантия

Страница: 30 / 36

30
Programming the Remote Control to Operate Other Devices
The HDTV Receiver remote control is a multi-brand or universal remote con-
trol that can be programmed to control most remote-controllable devices
from other manufacturers.
ote
The remote control may not be able to control all models of other brands.
11
Test your remote control.
To find out whether your remote control can operate a device with out
programming. Turn on the device such as a VCR and press the corre-
sponding mode button (VCR) on the remote control while pointing at the
device. Use the POWER and CH +/- buttons to see if the device
responds properly. If not, the remote control requires programming.
2 2
Turn on the device to be programmed. Then press the correspon-
ding mode button (VCR, AUX, TV or DVD) on the remote control.
3 3
Press the POWER button and the MUTE button simultaneously.
The remote control is now ready to program the code for the device.
4 4
There are two ways to find the right code for the device.
First, if you press the CH +/- buttons repeatedly, the code will change
one at a time. Press the Power button after each code change. If the
right code is found, the device will turn off.
Second, enter the code number using the digit buttons on the remote
control. The right code numbers for the corresponding device can be
found on the following pages. Again, if the code is correct, the device will
turn off.
5 5
Press the EXIT button to store the programming code.
6 6
Test the remote control functions to see if the device responds properly.
If not, repeat from step 2.