Zenith C27F33, Инструкция по установке и эксплуатации, Гарантия

Страница: 25 / 32

You can connect additional equipment, such as VCRs, camcorders etc. to your TV.
Connection panels shown here may be somewhat different from your TV.
Here is an example drawing of a typical jackpack layout.
1. IN 1 JACKS : Connect external equipment outputs (VCR, LASER DISC, CAMCORDER) to these
inputs. Use the TV/VIDEO button to select VIDEO-1 .
2. IN 2 JACKS : Connect external equipment outputs (VCR, LASER DISC, CAMCORDER) to these
inputs. Use the TV/VIDEO button to select VIDEO-2 .
3. IN 3 JACKS : Connect external equipment outputs (VCR, LASER DISC, CAMCORDER) to these
inputs. Use the TV/VIDEO button to select VIDEO-3 .
4. OUT JACKS: Connect external equipment inputs (VCR, Audio amplifier) to these outputs for recording
or monitoring the selected program.
5. § / EARPHONE JACK
Note: This TV is programmed to remember which mode it was last set to, even if you turn the TV off.
External Equipment Connections
Connecting AUDIO/VIDEO IN Jacks
1. Connect the audio/video output jacks of the VCR to
IN 1 or IN 2(A/V) jacks on the back of TV.
If you connect the video jack only, you can't hear the
sound from the TV.
2. Use the TV/VIDEO button to select VIDEO-1 or
VIDEO-2 .
Note: If you connect the audio/video output jacks of
the VCR to the IN 3(A/V) jacks on the side of
the TV, select
VIDEO-3 .
3. Press the PLAY button on the VCR.
The video playback appears on the TV screen.
Note: If using a monaural VCR, connect the output jack of VCR to the AUDIO L/MONO IN jack of TV so
that the sound can be heard from both speakers. If you connect it to the AUDIO R IN jack of TV,
the sound is heard only from right speaker.
25
OUT
IN1
AUDIO (L/MONO) (R) VIDEO
VIDEO
AUDIO
L/MONO
R
IN 3
TV
TV
Playback VCR
OUT
IN1
AUDIO (L/MONO) (R) VIDEO
COMPONENT
DVD IN(480i)
Y
P
B
P
R
IN2
VIDEO (L/MONO) (R) VIDEO
1
4
2
EARPHONE
VIDEO
AUDIO
S-VIDEO
L/MONO
R
IN 3
3
5