Zenith C27F33, Инструкция по установке и эксплуатации, Гарантия

Страница: 10 / 32

Basic TV Setup and Operation
Memorizing Channels with Manual Program
Using Memory/Erase button
MANUAL PROGRAM the TV using the convenient memory/erase
button on the remote control.
1. Use the
D /
E
or NUMBER buttons to select the channel number
you want to memorize or erase.
2. Press the memory/erase button.
The on screen display appears as shown right.
3. Use the memory/erase button to select
Memory
or
Erase
.
4. Press the enter (
A
) button to remove menu.
Using the Manual Program Menu
1. Press the menu button and then use D / E button to select the
menu shown to the right.
2. Press the
G
and then use D / E button to select Manual
program .
3. Press the G button to enter the Manual program mode.
4. Use the F / G to select Memory or Erase .
5. Use the E button to select Channel .
6. Use the F / G or NUMBER buttons to select the channel number
you want to memorize or erase.
7. Use the
E
button to select Name .You can make a channel name.
8. Use the
F
/
G
button to select a word position and then D / E button
to enter blank, number 0 to 9 and the alphabet A to Z .
9. Repeat steps 4 to 8 to memorize or erase other channels.
Channel Tuning
Use the D / E button to easily select the next higher or lower channel
then the channel being viewed, or NUMBER buttons to directly select
the desired channel.
Adjusting Volume (Sound)
Use the
G
button to increase the volume level or
F
button to decrease
the volume level.
To turn off the sound, press the mute button.
The word
Mute is displayed (it’s not displayed in the Caption mode).
Using Mute is convenient if you need to answer telephone calls.
To restore the muted sound, press the mute button again or vol
F
/
G
button.
10
Mute
o Volume 15
+ Manual ++ TV14 ++ Memory
Auto + program
Manual + program
Favorite + channel
++ MOVE + {NEXT + MENU : EXIT
Memory ® Erase
Channel TV14
Fine 0
Name _____
++ MOVE + }{
+
ADJUST + Å BACK
Memory® i Erase Memory